PRODUCT FEATURES

1. Can organic adhere to concrete, which can efficiently prevent water infiltration from going inside the gap between the waterproof membrane and the structure.
2. No need protection layer, can walk on it immediately after construction.
3. Single side adhesive, without influence of base layer displacement.
4. Short construction period, about 1/3 of normal waterproof membrane’s.
5. Easy to apply, efficient and save cost.
6. Can remain a very good tension strength even being soaked in water for a long time.
7. Long usage life time, good weather fastness.
8. Excellent puncture resistance.

SCOPE OF APPLICATION

Non asphalt polymer self adhesive waterproof membrane is specially designed for the underground waterproof construction, which it is only suitable for underground or channels waterproof construction.

APPLICATION PROCESSES

1. Flat concrete construction steps:
   Base level cleaning -> Mark the concrete with ink line -> Pave the P200 -> Joints and corners treatment -> Detail place Processing -> Self inspection, repair and acceptance-> steel bar binding -> concreting
2. Vertical concrete construction steps
   Vertical structure leveling -> Vertical concrete cleaning -> Mark the concrete with ink line -> Pave the P200 -> Joints and corners treatment -> Detail place Processing -> Self inspection, repair and acceptance-> steel bar binding -> concreting

SPECIFICATIONS

NOTES

1. When use double sides sealant tape for connecting the membranes, the width of the tape should not less than 150mm.
2. Pre-laid: The concrete must be dry, flat, clean; Wet apply: need to use polyethylene powder and cement powder (>325), mix and stir as a glue.

PACKING, TRANSPORTATION AND STORAGE

1. Membranes should be stored separately. Keep membranes dry and ventilated, protected from sun and rain. Store temperature should between 5-45℃.
2. One layer up-right storage in warehouse, no more than 2 layers up-right during transportation.
3. Prevent it from inclination or lateral pressure. If necessary, cover it with felt-cloth.
4. Storage period: 1 year under normal operation of storage.

TECHNICAL DATA

Performance standard GB/T23457-2009 Type P