Non-curing Rubber Asphalt Waterproofing Coating-Shenzhen Elansia Technology Co.,Ltd

Home

Non-curing Rubber Asphalt Waterproofing Coating

JH-A200 This Type of coating is a new-designed environmental-friendly and high-solids hot-melt waterproofing coating. With the properties of maintaining adhesive after long term expose to the air, excellent self-healing, peeling resistance and have excellent adhesive ability; meanwhile, its great creep properties can fix the tiny holes and cracks more efficient, better solve the problem of water moving between layer. It can be adopted operation methods such as hot-shaving and hot-grouting, etc.

Product Inquiry

Product description

PRODUCT FEATURES

Excellent creep ability: absorbs effectively stress from substrate, and protect waterproofing layer from being damaged when stressed on substrate and extend lifetime of usage.
Great adhesive power: will stick tightly immediately once touch, hard to peel off, can fix the cracks of the substrate.
Great thermal adaptability: can resistant to 60-70℃ and keep good flexibility even at -25℃.
Excellent self-healing ability: When waterproofing layer is damaged, the damaged area won’t extend and will be no water migration at the bottom of waterproofing layer. Due to the creep ability, the damaged area can be self-repairing, which improves the waterproofing layer liability greatly.

SCOPE OF APPLICATION

Widespread use in Industrial and civil buildings’ roof and underground waterproof construction.
Grouting leakage-proof construction of deformation joint
Use together with waterproof membrane can form a reliable compound waterproof system.

APPLICATION METHOD

Substrate requirement: Must be flat, solid, non crack, non humid, clean without sand, dust and oil waste.
Internal and external corners, pipes’ bottom should be made into circular arc shape. Circular diameter should over 50mm.
Collocation proportion and construction:
Heat and melt the coating with special equipment, blade brush the coating uniformly. If use together with membranes, please pave the membrane as soon as possible to ensure the best performance of the waterproof system. Membrane connecting joints can also use coating as glue.
Pave membranes straightly, smoothly on the surface of non-curing rubber asphalt waterproofing coating. Overlapping width should be controlled between 80 -100 mm. Use roller to make membranes and substrate stick together after operation completed
Build up protection layer which is made of concrete or cement mortar after acceptance inspection.

SPECIFICATION

Package Specification	Net Weight
Φ 29 x 41cm	20kg

PACKING, TRANSPORTATION AND STORAGE

Pay attention to safety and fire during transportation. Keep it out of rain, mutual squeeze and damage.
Keep it ventilated and dry. Storage should avoid high temperature.

TECHNICAL DATA

Performance standard Q/JH001-2016

Physical Function：

Item		Index
		Ⅰ	Ⅱ
Point of flammability		≥180℃
Solid content		≥80%	≥98%
Bonding behavior	Dry concrete	100% cohesive failure
	Wet concrete
	Peeling strength to membrane	≥4.0N/mm or 100% cohesive failure
Elongation rate		≥200mm	≥300mm
High temperature resistance		60℃, no slipping, dripping or fall off	70℃, no slipping, dripping or fall off
Low temperature flexibility		-20℃, no crack
Self healing		No water seepage
Oil permeability		≤2 pages
Anti water moving between layers		0.6MPa, no water

Limits of Harmful Substances:

Item		Index
		A	B
VOC /(g/L) ≤		50	200
Benzene / mg/kg ≤		200
Toluene + Ethylbenzene + Xylene/ g/kg ≤		1.0		5.0
Phenol / mg/kg ≤		100		100
Anthracene / mg/kg ≤		10		10
Naphthalene / mg/kg ≤		200		200
Dissociate TDI/ ≤		3		7
Soluble Heavy Metals/(mg/kg)a	Pb ≤	90
	Cd ≤	75
	Cr ≤	60
	Hg ≤	60
a: Optional Field, negotiated by supply and requisitioning parties.

Download

One-Components Polyurethane Waterproofing Coating

Expoxy Primier Coating

One-Components Polyurethane Waterproofing Coating

Expoxy Primier Coating

Related Products

Wet-applied_Pre-laid Polyester Reinforced Waterproofing Membrane

JH-W100 This Type of membrane is manufactured by special customized premium asphalts, with active coagent and tackifier resin as its modifier, and polyester cloth as its reinforcement, which has realized the full adhesion and permanent “Skin-type” waterproofing between the membrane and concrete.

TPO Waterproofing Membrane

JH-P500 TPO waterproof membrane is a type of excellent capacity waterproof sheet combines ethylene, propylene rubber and polypropylene into a thermoplastic polymer resin as its main material, and mix together with antioxidants, antiager and softener, then by manufactured with advantage technology. This product has both ethylene propylene rubber’s excellent weather ability and polypropylene’s weld ability, which can show high elasticity in normal temperature, and can be shaped in high temperature like plastic. The middle woven polyester fabric reinforcement can provide the membrane with high tension ability, fatigue resistance and durability performance

SBS Modified Bituminous Waterproofing Membrane

JH-N100 This Type of membrane is manufactured by special customized premium asphalts, with Styrene Butadiene Styrene (SBS), elastomer resin as its modifier and reinforced by polyester base cloth. The structure of it consist of polymer modified bitumen materials, middle reinforcement cloth and some surface cover materials.

PVC Waterproofing Membrane

JH-P400 PVC waterproof membrane is a type of excellent capacity waterproof sheet, with PVC resin as its main material and mix together with appropriate portion of plasticizer, anti-uv agent and stabilizer, then be manufactured by extrusion molding method. Because of the unique product formula, the usage life time of this product is much longer than normal waterproof materials, which will increase the usage life time of the whole waterproof system (Roof: > 20 years; Underground: >50 years).

Product Inquiry

Our staff will contact you within 24 hours (weekdays)