Non-asphalt Polymer Self-adhesive Waterproofing Membrane
+
  • Non-asphalt Polymer Self-adhesive Waterproofing Membrane

Non-asphalt Polymer Self-adhesive Waterproofing Membrane

EL-P200 is a kind of multi-layers material consisting of three layers, including the HDPE rubber film layer, the polymer adhesive layer and the unique process of reactive inorganic polymer particles layer. It can have chemical reaction to concrete, with the ability of high tension and permanent bonding power, which can completely stop the water from running between different layers. Even being soaked in water for a long time, it can still remain a very good tension strength.

Product description

PRODUCT FEATURES

1. Can organic adhere to concrete, which can efficiently prevent water infiltration from going inside the gap between the waterproof membrane and the structure.

2. No need protection layer, can walk on it immediately after construction.

3. Single side adhesive, without influence of base layer displacement.

4. Short construction period, about 1/3 of normal waterproof membrane’s.

5. Easy to apply, efficient and save cost.

6. Can remain a very good tension strength even being soaked in water for a long time.

7. Long usage life time, good weather fastness.

8. Excellent puncture resistance.

 

SCOPE OF APPLICATION

Non asphalt polymer self adhesive waterproof membrane is specially designed for the underground waterproof construction, which it is only suitable for underground or channels waterproof construction.

 

APPLICATION PROCESSES

1. Flat concrete construction steps:

Base level cleaning -> Mark the concrete with ink line -> Pave the P200 -> Joints and corners treatment -> Detail place Processing -> Self inspection, repair and acceptance-> steel bar binding ->  concreting

2. Vertical concrete construction steps

Vertical structure leveling -> Vertical concrete cleaning -> Mark the concrete with ink line -> Pave the  P200 -> Joints and corners treatment -> Detail place Processing -> Self inspection, repair and acceptance-> steel bar binding ->  concreting

 

NOTES

1. When use double sides sealant tape for connecting the membranes, the width of the tape should not less than 150mm.

2. Pre-laid: The concrete must be dry, flat, clean; Wet apply: need to use polyethylene powder and cement powder (>325), mix and stir as a glue.

 

PACKING, TRANSPORTATION AND STORAGE

1. Membranes should be stored separately. Keep membranes dry and ventilated, protected from sun and rain. Store temperature should between 5-45℃.

2. One layer up-right storage in warehouse, no more than 2 layers up-right during transportation.

3. Prevent it from inclination or lateral pressure. If necessary, cover it with felt-cloth.

4. Storage period: 1 year under normal operation of storage.

Download

Related Products

Wet-applied_Pre-laid Polyester Reinforced Waterproofing Membrane

JH-W100 This Type of membrane is manufactured by special customized premium asphalts, with active coagent and tackifier resin as its modifier, and polyester cloth as its reinforcement, which has realized the full adhesion and permanent “Skin-type” waterproofing between the membrane and concrete.

TPO Waterproofing Membrane

JH-P500 TPO waterproof membrane is a type of excellent capacity waterproof sheet combines ethylene, propylene rubber and polypropylene into a thermoplastic polymer resin as its main material, and mix together with antioxidants, antiager and softener, then by manufactured with advantage technology. This product has both ethylene propylene rubber’s excellent weather ability and polypropylene’s weld ability, which can show high elasticity in normal temperature, and can be shaped in high temperature like plastic. The middle woven polyester fabric reinforcement can provide the membrane with high tension ability, fatigue resistance and durability performance

SBS Modified Bituminous Waterproofing Membrane

JH-N100 This Type of membrane is manufactured by special customized premium asphalts, with Styrene Butadiene Styrene (SBS), elastomer resin as its modifier and reinforced by polyester base cloth. The structure of it consist of polymer modified bitumen materials, middle reinforcement cloth and some surface cover materials.

PVC Waterproofing Membrane

JH-P400 PVC waterproof membrane is a type of excellent capacity waterproof sheet, with PVC resin as its main material and mix together with appropriate portion of plasticizer, anti-uv agent and stabilizer, then be manufactured by extrusion molding method. Because of the unique product formula, the usage life time of this product is much longer than normal waterproof materials, which will increase the usage life time of the whole waterproof system (Roof: > 20 years; Underground: >50 years).

Product Inquiry

Our staff will contact you within 24 hours (weekdays)